Firestone Building Products Co.
Firestone Building Products Company is a leading manufacturer of single-ply EPDM and thermoplastic roofing systems, asphalt-based roofing systems and polyiso insulation for the commercial and flat roof residential roofing industry. In order to achieve outstanding rooftop performance, the company annually invests millions of dollars in research and development. As a result, each component of the Firestone Roofing System is designed and tested to meet or exceed industry standards a performance record that has made the company the preferred supplier of roofing systems throughout the world.
Building owners can get everything they need for a Total Roofing System including membrane, insulation and accessories, sales and technical support and a wide range of warranties from a single source - Firestone Building Products. Were dedicated to quality and innovation in our products and services, and we have the people, the facilities, the products and the expertise to meet your needs. Thats why when it comes to roofing, only Firestone can say, Nobody Covers You Better.
Firestone's single-ply EPDM roofing systems are based on a high-performance synthetic rubber compound that provides outstanding weathering characteristics in climates worldwide. From office buildings and distribution warehouses to hospitals and schools, Firestone has an EPDM roofing solution thats right for you.
Products
RubberGard EPDM
Since its introduction in 1980, Firestone RubberGard EPDM has dominated the single-ply roofing market through its proven performance, durability and flexibility over a wide range of building types. RubberGard EPDM has delivered more than two decades of commercial roofing success by building upon a heritage of innovation in rubber polymer technology.
The versatile membrane offers a variety of installation options including fully adhered, ballasted or mechanically attached that deliver superior long-term weatherability and exhibit exceptional wind uplift resistance.
RubberGard Platinum EPDM
Firestone RubberGard Platinum Roofing Systems deliver a 30-year warranty covering incidental punctures, high winds and hail up to two inches in diameter. RubberGard Platinum EPDM combines the strength of 90-mil RubberGard EPDM with Firestone HailGard composite insulation for outstanding thermal performance and puncture resistance.
Seamed with Firestone QuickSeam Tape, RubberGard Platinum EPDM offers watertight seams with increased strength.
RubberGard EcoWhite EPDM
Utilizing the same characteristics and benefits of Firestones established line of RubberGard EPDM membranes, RubberGard EcoWhite EPDM membrane offers a highly reflective EPDM solution to coated membranes and thermoplastics. The environmentally friendly white membrane provides building owners with the proven performance of traditional EPDM, while offering the ease of installation roofing contractors need.
Available in a .060 (1.52mm) thickness, RubberGard EcoWhite EPDM membrane is a bi-laminate, white-on-black cured membrane that can be used in conjunction with the comprehensive EcoWhite line of accessories for rapid, consistent and cost-effective fully adhered installations. It is available for UL- and FM-rated systems, exceeds ASTM D 4637 standards, and is eligible for a 15-year Firestone Red Shield Warranty.
RubberGard EcoWhite membranes initial solar reflectance is 0.80, when tested in accordance with the Cool Roof Rating Council (CRRC) program. Also, based on recent CRRC testing, EcoWhite has a solar reflectance index (SRI) of 99, making it one of the industrys most reflective white membranes. Plus, EcoWhite EPDM can help achieve points in the Leadership in Energy and Environmental Design (LEED) rating system, a voluntary national standard established by the U.S. Green Building Council.
Product Literature
EcoWhite Brochure - Click Here
EcoWhite Platinum EPDM
A premium product in the reflective EPDM product line, 90-mil EcoWhite Platinum EPDM reflects sunlight which keeps the membrane cool. Bringing together the eco-friendly attributes of a white membrane with the proven performance of traditional EPDM, this new roofing solution meets LEED certification requirements, exceeds ASTM D-4637 standards and is UL and FM approved.
EcoWhite Platinum EPDM is manufactured as 10-foot wide, no-fold, seamless panels which are easy to handle and quick to install. More flexible than thermoplastic single-ply membranes, it allows for year-round application. It is the only white EPDM on the market that offers the benefits of the Firestone Red Shield 30-year Platinum Warranty, which includes coverage of incidental punctures, punctures up to 2 inches from hail and damage from winds of up to 100 mph.
A 90-mil thick, bi-laminate membrane in Firestones popular EcoWhite product line, EcoWhite Platinum EPDM sets the industry standard for sustainable, white, reflective roofing solutions, and offers a premium choice designed to bring more value to any investment. Also, a comprehensive line of EcoWhite QuickSeam Accessories is available to help you complete projects faster and more efficiently.
Product Literature
90-mil EcoWhite Platinum Brochure - Click Here
EPDM PT Membranes
These new membranes dramatically expand the enormously popular EcoWhite product line to include both 60-mil and the new 90-mil thicknesses. Additionally, we have added pre-taped panels to our standard black RubberGard Platinum EPDM product line.
In addition to the outstanding solar reflectivity and durability of EcoWhite membranes, pre-taping yields the following features and benefits:
- Easier and faster installation which can significantly reduce labor costs
- Factory installed seam tape yields higher quality seams
- Seam tape is cut flush with membrane to yield a more aesthetic finished product
EcoWhite EPDM PT (60 mil) systems are eligible for a Red Shield Warranty up to 20 years. EcoWhite Platinum (90 mil) EPDM PT membranes, just like all Platinum EPDM membranes, qualify for a 30-year warranty, the best in the industry.
RubberGard R.M.A.
Suited for large and small roofs, the non-reinforced membrane of the Firestone RubberGard R.M.A. System provides uninterrupted weatherable thickness, while its large panels deliver faster installation. RubberGard R.M.A. uses large EPDM panels bonded to Firestone QuickSeam R.M.A. Strips. The mechanically attached system can provide up to 25 years of warranty protection with no additional maintenance or inspections required to maintain coverage.
The RubberGard R.M.A. System is a recyclable roofing option that also offers a low annualized cost, reduced VOC emissions, and complies with certain Factory Mutual and UL approval standards.
Product Literature
RubberGard R.M.A. System Flyer - Click Here
UltraBlend Roofing System
The UltraBlend Roofing System combines the strengths of UltraPly TPO and RubberGard EPDM in a comprehensive, warrantable roofing solution. Using UltraPly TPO for horizontal roof surfaces and either RubberGard EPDM or RubberGard EcoWhite EPDM for vertical surfaces such as parapet walls, the UltraBlend system can help contractors save time and reduce labor costs, while giving building owners the confidence that their roof is covered by durable roofing materials that have withstood the test of time. In addition, Firestones full line of EcoWhite QuickSeam accessories including flashings, pipe boots, penetration pockets, and patches can add to the ease and speed of installation.
The UltraBlend roofing system has a number of features, including:
- Fast installation of the UltraPly TPO membrane with heat welded seams
- Use of either black, non-reflective EPDM or white, highly reflective EPDM on parapet walls
- Option to use various combinations of accessories and flashings from both product lines
- Excellent flexibility and adhesion in cold weather where its most needed walls and details
Among the many benefits the UltraBlend system offers are:
Low installation costs associated with mechanically attached UltraPly TPO membrane.
Reduced labor costs through the use of QuickSeam accessories
Additional Resources
Read new industry information about sustainable EPDM roofing systems, their proven performance record and how to choose the best EPDM membrane for your climate in this supplement.2010 ERA Supplement (987.3Kb)
UltraPly TPO
Suitable for a variety of low slope commercial roofing applications, Firestone UltraPly TPO is a sustainable roofing solution for a wide range of building types.
UltraPly TPO also offers design options with membranes available in reflective white, tan or gray, which can help reduce a buildings cooling requirements. White and tan UltraPly TPO membranes meet the new version of the California Energy Efficiency Standards for Residential and Nonresidential Buildings (Title 24). These standards define cool roofs in California to have a minimum three-year aged reflectance of 0.55 and a minimum thermal emittance of 0.75 for low-sloped nonresidential buildings.
White and tan UltraPly TPO membranes are listed with the Cool Roof Rating Council (CRRC), and meet or exceed the new Title 24 requirements for low-slope roofing membranes. The listing for white and tan UltraPly TPO membranes can be found on the CRRC Web site.
The flexible, hot-air welded membrane is available in 8, 10 and 12' widths.
Product Literature
UltraPly TPO Brochure - Click Here
UltraPly TPO Accessories Brochure - Click Here
Platinum TPO
Firestone UltraPly Platinum TPO is the first thermoplastic roofing system backed by a 30-year warranty. Comprised of a durable, 80-mil-thick scrim-reinforced membrane, UltraPly Platinum TPO can be fully adhered or mechanically attached to Firestone HailGard insulation and fastened to a wide range of deck substrates.
UltraPly Platinum TPO features Firestone Wide-Weld technology to provide the industry's widest field seams and highest wind rating, while its scrim-reinforced membrane offers enhanced puncture, tear and abrasion resistance. The reflective surface of UltraPly Platinum TPO meets EnergyStar standards for energy savings in warm climates, making it an exceptional long-term roofing value for building owners.
Product Literature
UltraPly TPO Platinum Flyer - Click Here
ReflexEON TPO
Backed by more than 10 years of field and laboratory testing on actual rooftop installations, Firestone ReflexEON TPO is the first thermoplastic roofing membrane to greatly reduce the effects of microbial growth, and the subsequent staining and loss of reflectivity.
By reducing microbial growth commonly seen on white roofing systems, ReflexEON TPO remains cleaner and extends the membranes ability to reflect heat and improve a buildings energy efficiency. ReflexEON TPO is available as a 60-mil-thick membrane and is warranted for up to 20 years.
For a 30-year total system warranty, Firestone also offers the ReflexEON TPO Platinum Roofing System, which features an 80-mil-thick membrane mechanically attached or fully adhered to Firestone HailGard composite insulation for outstanding thermal performance and puncture resistance.
Product Literature
ReflexEON TPO Brochure - Click Here
UltraPly TPO XR
Firestone UltraPly TPO XR combines the durability of a single-ply membrane with the heat welding properties of thermoplastic in an adhered application. Installation flexibility enables the roofing system to be installed with either hot asphalt or Firestone UltraPly TPO XR Bonding Adhesive.
[Firestone UltraPly TPO XR]
With an external backing of eight-ounce, non-woven polyester, Firestone UltraPly TPO XR offers an additional internal and external reinforcement for remarkable puncture resistance.
Available in white, tan or gray and in thicknesses of 45- or 60-mil, UltraPly TPO XR provides excellent weatherability and strong resistance to UV rays and common rooftop chemicals. Ideally, a low VOC adhesive would be used to fully-adhered fleeceback UltraPly TPO XR roofing systems. The XR Stick Adhesive is a 2-part polyurethane adhesive can be used over many existing substrates, adhereing UltraPly TPO XR for both new and reroof applications.
Product Literature
UltraPly TPO XR Flyer - Click Here
UltraPly TPO SA
UltraPly TPO SA membrane is an easy to install, self-adhered, reflective white membrane that dramatically reduces labor costs. Available in 45- and 60-mil thickness, it meets industry regulations, improves worksite air quality and eliminates odor.
UltraPly TPO SA membrane combines the flexibility of Firestones proven TPO membrane with a factory applied, pressure sensitive, hot melt adhesive. This eliminates field application of bonding adhesives and enhances adhesion to approved substrates, resulting in a lay-flat application. An ideal flashing application for parapet walls and vertical surfaces, the membrane also features strong, reliable, heat welded seams and conforms better to insulation joints and step offs.
Available in 6.25-foot and 10-foot wide rolls, UltraPly TPO SA membrane is easier and faster to install than fully adhered systems, dramatically reducing installation and labor costs and allowing for safer installation with fewer crew members. Its poly release liner and packaging are designed to protect the rolls during handling and are easy to remove prior to installation.
Firestone UltraPly TPO SA products offer a variety of options to cover almost every job, including small and large projects and specialty work. With FM 1-90 and UL Class A ratings, the membrane meets the requirements of ASTM 6878 Standards. It has an initial solar reflectance of 0.74 and initial thermal emittance of 0.84 when tested in accordance with the Cool Roof Rating Council. UltraPly TPO SA membrane can earn points toward LEED certification and Energy Star qualification, and is eligible for a Firestone Red Shield 20-year Warranty
Product Literature
UltraPly TPO SA Membrane Brochure - Click Here
UltraBlend Roofing Systems
The UltraBlend Roofing System combines the strengths of UltraPly TPO and RubberGard EPDM in a comprehensive, warrantable roofing solution. Using UltraPly TPO for horizontal roof surfaces and either RubberGard EPDM or RubberGard EcoWhite EPDM for vertical surfaces such as parapet walls, the UltraBlend system can help contractors save time and reduce labor costs, while giving building owners the confidence that their roof is covered by durable roofing materials that have withstood the test of time. In addition, Firestones full line of EcoWhite QuickSeam accessories including flashings, pipe boots, penetration pockets, and patches can add to the ease and speed of installation.
The UltraBlend roofing system has a number of features, including:
- Fast installation of the UltraPly TPO membrane with heat welded seams
- Use of either black, non-reflective EPDM or white, highly reflective EPDM on parapet walls
- Option to use various combinations of accessories and flashings from both product lines
- Excellent flexibility and adhesion in cold weather where its most needed walls and details
Among the many benefits the UltraBlend system offers are:
- Low installation costs associated with mechanically attached UltraPly TPO membrane
- Reduced labor costs through the use of QuickSeam accessories
The UltraBlend system is eligible for up to a 20-year Firestone Red Shield Warranty.
UltraPly TPO Invisiweld
Firestone UltraPly TPO InvisiWeld System is a high-performance, non-penetrating TPO membrane fastening system. The mechanically attached system provides high wind uplift ratings. Installation is simplified, reducing labor and material costs.
This VOC-free system features TPO-coated Firestone UltraPly TPO InvisiWeld Plates attached to the UltraPly TPO membrane using an induction welding tool. The InvisiWeld System meets or exceeds Factory Mutual (FM) approvals and requirements.
The roofing season can be extended since the InvisiWeld System functions well in many climates, including extremely cold environments where adhesives and asphalt are difficult to use. Eliminating insulation seam plates and fasteners reduces installation time and labor costs. Membrane waste is less because a 6" in-seam lap is no longer needed. This system requires less material for perimeters and corners than other attachment methods.
Another product to support Firestone's sustainable efforts is the EnviroReady Roofing System and Warranty, which allow users the option to install a pre-approved premium conventional roof today and upgrade that roofing project with green technology, including photovoltaic and garden systems, up to seven years from the date of installation.
Recycle Your Roof
In addition to providing energy saving roofing solutions, Firestone wants to assist in your eco-friendly efforts at the end of your roofs life cycle. We invite you to take advantage of our strategic industry recycling partnership before you begin your next tear-off project. Since 2006, more than five million square feet of EPDM membrane has been recycled and diverted from landfills. This represents the largest recorded figure for a recycled commercial roofing product in North America.
Firestone SBS
Firestone SBS Modified Bitumen Roofing Systems combine exceptional elongation and fatigue resistance properties with the strength of a glass-reinforced polyester mat. Available in white, black and other granule surface colors, Firestone SBS membranes may be installed by heat welding, hot asphalt, cold-applied adhesive or mechanical attachment.
Firestone APP
Firestone APP Modified Bitumen Roofing Systems are available in a variety of thicknesses in smooth and granule surfaces. Reinforced with a tough, non-woven polyester mat, Firestone APP membranes deliver superior rooftop performance for both new and reroof applications. Firestone APP membranes may be installed by heat welding or with cold-applied adhesives.
Firestone BUR
Firestone offers Ply IV (4) M and Ply VI (6) M asphalt impregnated, glass fiber mat reinforced roofing felts that can installed in multiple layers with a flood coat and aggregate or used in combination with Modified Bitumen.
The Ply IV (4) M and Ply VI (6) M felts provide superior durability and ease of application to construct Firestone Built-Up Roofing (BUR) Systems.
Firestone Self-Adhered Base
The two-ply Firestone Self-Adhered Base System combines Firestone MB Base SA with either an APP or SBS cap sheet torch-applied directly over the base sheet. The systems specification flexibility allows specifiers to select the cap sheet best suited to job conditions and local installation practices.
During torch application of the cap sheet, the fiberglass-reinforced base sheet serves as an effective work platform and thermal barrier for torch application. The base sheet also achieves complete fusion, assuring that the MB Base SA System works as a redundant monolithic waterproofing layer beneath the cap sheet.
Modified Bitumen Accessories
Regardless of your asphalt roofing system requirements, Firestone is uniquely positioned to meet all your commercial roofing needs. Firestones diverse modified bitumen product line includes a variety of accessories to ensure your entire asphalt-based roofing system includes the highest quality materials. No matter what adhesives and flashings your project calls for, Firestone has the right products for your next modified bitumen roofing system.
LiquiGard Adhesive
LiquiGard Adhesive is an economical, odorless and VOC-free adhesive for modified bitumen roofing systems. The 2-part urethane adhesive forms extremely strong bonds between roofing membranes and substrates, creating a watertight seal and superior resistance to high winds. LiquiGard is ideal for schools, hospitals and other applications where using asphalt, heat welding with torches or odorous solvents is not acceptable. This proven adhesive is a durable, easy-to-install option for roofing professionals. Available in 5-gallon pails, LiquiGard Adhesive is acceptable for up to a 25-year Firestone Red Shield Warranty.
UltraFlash Liquid Flashing
UltraFlash Liquid Flashing is a fast-curing, low-VOC coating that forms a flexible elastomeric layer around vents, pipes, wires and other difficult roof details for SBS and BUR roofing systems. This watertight chemical bond is abrasion and chemical resistant. It is approved as a root and moisture barrier as well as for potable water applications. UltraFlash may be painted with a Firestone coating and can accept granules to match roof surfaces. UltraFlash Liquid Flashing can be used in conjunction with LiquidGard Membrane Adhesive, and is available in several convenient sizes including dual 850 ml cartridges, 1-gallon cans and 5-gallon pails.
Multi-Purpose MB Cold Adhesive
Multi-Purpose MB Cold Adhesive consists of an asphalt matrix blended with fibers and selective performance additives. It is designed to meet the adhesion characteristics necessary to adhere Firestone Base Sheets, SBS Cap Sheets and APP Cool Cap Sheets. Multi-Purpose MB Cold Adhesive can also be used to adhere laps in two-ply systems.
Multi-Purpose MB Flashing Cement
Multi-Purpose MB Flashing Cement consists of an asphalt base blended with fibers and selective performance additives. It is designed to provide excellent adhesion for Firestone SBS Base Sheets and APP Cool Products. Multi-Purpose MB Flashing Cement can also be used to adhere Firestone base sheets used as a base ply on vertical wall flashings.
UltraFlash Liquid Flashing
UltraWhite Granulated Cap Sheet
UltraFlash
Firestone Solution for Difficult Details
Firestone UltraFlash Liquid Flashing is a 2-part urethane liquid rubber flashing and coating that can be easily applied to the most difficult of rooftop details, creating a durable watertight seal. UltraFlash meets the challenges of creating a watertight seal and is suitable for use with both SBS and BUR systems.
Proven Reliability
Firestone UltraFlash Liquid Flashing is a fast-curing, low-VOC coating that forms a flexible elastomeric layer around vents, pipes, wires and other difficult roof details. It adheres well to many substrates such as metal, concrete and wood, making it ideal for difficult SBS and BUR repair applications.
UltraFlash utilizes a specific formulation of elastomeric polymers that has been used in exterior applications for more than 30 years on thousands of rooftop applications. UltraFlash is acceptable as part of a Firestone Red Shield Warranty.
UltraFlash Liquid Flashing
- Cures fast (an hour or less depending on temperature and weather)
- Forms a watertight chemical bond
- Can be painted with a Firestone recommended coating
- Is abrasion and chemical resistant
- Is suitable for ponding water conditions
- Can accept granules to match roof surface
- Is approved for potable water applications
- Is approved as a root and moisture barrier under vegetative roofs
UltraFlash is available in several convenient sizes including dual 850 ml cartridges, 1-gallon cans and 5-gallon pails.
Ultra White
Firestone introduces modified bitumen cap sheets made with UltraWhite roofing granules, a cool roofing solution that are ideal for new and reroof applications. Unlike traditional granule-surfaced modified bitumen cap sheets that require additional liquid coatings or surfacing either during manufacturing or after installation, Firestone UltraWhite granules are the only reflective materials applied during the manufacturing process. The resulting cap sheet provides greater light reflectivity and heat emissivity, reducing energy consumption, electrical demand and labor costs.
Available in SBS and APP modified bitumen cap sheets utilizing Firestones innovative UltraWhite granules, the modified bitumen cap sheets can be applied with hot asphalt, heat welding or cold adhesive and are compatible with steel, concrete, plywood and wood decks, providing greater versatility and appeal for both new and reroof applications. They are resistant to foot traffic and hail and demonstrate excellent granule retention. Since Firestone cap sheets do not require factory or field-applied liquid coatings, the application is cleaner and will not crack or peel.
UltraWhite Modified Bitumen Cap Sheets are UL- and FM-code approved and meet requirements for Californias Title 24 regulations and can help achieve points in the U.S. Green Building Councils LEED rating system. Its reflectivity is also consistent with Cool Roof Rating Council (CRRC) programs.
Firestone UltraWhite Modified Bitumen products may be included in a 20-year Firestone Red Shield Warranty. When installed using Firestone insulation and a cover board, UltraWhite cap sheets are eligible for a 25-year Firestone Red Shield Warranty.
Some key benefits of Firestone's MRS include:
- Lightweight panels provide fast and easy installation in a factory environment.
- Superior weatherability, even in the harshest conditions, results in long-term performance and owner satisfaction.
- Diverse panel sizes provide the best alternative for your modular needs while the variety of installation methods offer unique options for various code bodies
Product Literature
MRS Cornerstone Brochure - Click Here
MRS Product Flip Guide - Click Here
Firestone polyiso rigid foam board insulation is the ideal choice for any project and is used in approximately 60 percent of all new commercial construction applications.
All Firestone polyiso insulations use EPA approved blowing agents.
ISO 95+ Polyiso Insulation
Firestone ISO 95+ polyiso insulation offers high-energy efficiency through the highest R-value ratings per inch versus other insulation materials. Compatible with all types of commercial roofing systems, the lightweight, easy-to-handle insulation is especially suited for direct application on FM approved and UL classified steel roof deck assemblies. Standard flat Firestone ISO 95+ Insulation is available in board sizes of 4 x 4 and 4 x 8 and in thicknesses from 1 to 4.
Product Literature
PolyIso Insulation Brochure - Click Here
Tapered ISO 95+ Polyiso Insulation
When a substrate slope will not permit efficient drainage, Firestone Tapered ISO 95+ polyiso insulation provides an effective and economical solution. Properly installed Tapered ISO 95+ polyiso insulation can extend the life of the roof assembly by eliminating problems associated with ponded water. Firestone Tapered ISO 95+ polyiso insulation is available in slopes from 1/16 to 1/2 per foot. Firestone provides a variety of technical support services for the installation of tapered insulation through the Firestone Tapered Engineering Design Department.
Tapered Insulation Design Services
The Firestone Tapered Network uses the latest technology to offer architects, consultants, general contractors, distributors and roofing contractors a complete, accurate, and timely engineered tapered insulation system for any project.
Based in strategic locations throughout the U.S., Firestones fully trained and experienced designers have access to the most advanced software and hardware, including Taper Plus and AutoCAD. The team efficiently creates CAD-generated installation shop drawings ranging from basic tapered layouts to complex projects requiring quick turnaround time. Firestone is committed to providing accurate and timely tapered take-offs that encompass all critical elements affecting proper drainage.
Additionally, Firestone offers architects and consultants a tapered design assist service. Through this service, Firestone creates a professional and effective tapered system design for any project prior to bid. Based on a copy of the roof plan (AutoCAD format is preferred) and all relevant factors, our design team will create an AutoCAD drawing detailing the optimum tapered layout, which may then be transferred directly to the bid documents. By considering all mandatory design factors, Firestone offers peace of mind that your tapered design will promote positive drainage.
Resista Polyiso Insulation
Manufactured with a heavy-duty, double-coated, non-organic glass facer, Firestone Resista Polyiso Insulation Board is compatible with all fully adhered and mechanically attached single-ply, cold-applied, and self-adhered modified bitumen membranes.
Resista Polyiso is an economical choice offering exceptional protection against fire, wind and mold. With thicknesses varying from 1-4 inches, Resista Polyiso uses Firestones proprietary IsoGard foam technology to create an impressive insulating value per inch which can translate into significant energy savings. While other manufacturers may require up to 3.1 insulation over combustible decks, Resista Polyiso is the only 1 insulation board with a UL Class A rating for fire resistance. The double coating of non-organic facing material on both sides of the insulation board also meets ASTM D3273 standards for mold resistance.
In addition to fire, wind and environmental protection, Resista Polyiso is easy to cut and handle which can lead to reduced installation times and labor costs. This environmentally sustainable product also contains recycled content and can contribute to overall LEED certification for energy optimization and material resource credits.
Composites
Firestone thermally efficient Wood Fiberboard and Perlite Composite Boards feature a factory-controlled laminated overlay board for modified bitumen, BUR and single-ply applications.
With its nailable oriented strand board (OSB) surface and thermally efficient polyiso insulation, Firestone HailGard composite insulation is suitable for use with single-ply or asphalt membranes, metal roofing and shingles. HailGard insulation may be used as a component of Firestone Platinum to achieve a Platinum-PHW Warranty, protecting against accidental puncture, hail up to two inches in diameter and 100 mph winds.
Cover Boards
ISOGARD HD
ISOGARD HD contains a closed-cell polyiso core that utilizes IsoGard foam technology, and can provide greater UL fire ratings. ISOGARD HD provides the highest thermal performance of any 1/2 insulation cover board product on the market, and it is resistant to extreme weather conditions. Lightweight and easy to cut and install with more boards per pallet, this high density cover board offers savings from reduced transportation costs, labor and material during application.
DensDeck and DensDeck Prime
DensDeck and DensDeck Prime are non-structural, glass mat-faced roof boards that feature a non-combustible, water-resistant and silicone-treated gypsum core panel. DensDeck boards are an excellent substrate in most reroof applications and may be used with mechanically fastened or fully adhered RubberGard EPDM or UltraPly TPO roofing systems and are compatible with Modified Bitumen and BUR systems in certain assemblies. DensDeck and DensDeck Prime products are available from Firestone in 1/4, 1/2 and 5/8 thicknesses. DensDeck is a registered trademark of Georgia-Pacific.
FiberTop
FiberTop is suitable for use on almost any type of reroofing project and is a durable wood fiber insulation that serves as a recover board and provides insulating value in roof assemblies. Firestone FiberTop boards may be used under ballasted, fully adhered or mechanically attached single-ply roofing systems. They are also a suitable substrate for base sheets and Modified Bitumen roofing systems. FiberTop boards are available in 1/2" and 1" thicknesses.